|
Bolt FBN |
The flexible, low-cost expansion bolt for the non-cracked compression zone. |
|
|
|
|
|
|
|
|
|
|
Bolt FBN, zinc-plated steel |
Bolt FBN A4, stainless steel A4 |
BoltFBN-GS
(with large washer), zinc-plated steel |
Bolt FBN 8 H |
|
Approved for :
- Non-cracked concrete
C20./25toC50/60
|
Also suitable for :
- Concrete C12/15
- Natural stone with dense structure
|
|
|
For fixing of: |
|
- Steel constructions
- Railings
- Consoles
- Ladders
- Cable trays
- Machines
|
- Staircases
- Gates
- Facades
- Window elements
- Wooden constructions
|
|
|
DESCRIPTION |
|
|
|
|
- Anchor bolt for push-through and pre-positioned installation
When the hexagon nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the hole wall.
- A4 stainless steel and hot-dip galvanised version for outdoor use and in damp conditions.
- For wooden structures use the FBN GS with large washer as per DIN 440.
|
|
Advantages/benefits |
- Long thread allows stand-off installations and variable usable lengths.
- to 16 mm diameter also for reduced anchorage depths, e.g. for small loads or if reinforcements are hit.
- Embossed letter on the head for subsequent control of the installation as it indicates the setting depth.
- Hook anchor FBN 8 H for simple installation of meshed reinforcements, wire gratings, etc.
|
|
INSTALLATION |
|
|
|
|
Type of installation
Push-through and pre-positioned
installation |
|
Installation tips - For series installation we recommend the Anchor bolt setting tool FABS (see page 73) to reduce installation time.
- Before driving in, the hexagon nut must be brought into the optimal installation position (the bolt projects by 2 to 3 mm).
|
|
FBN |
|
|
|
|
|