'C' FRAME / OPEN-THROAT HYDRAULIC PRESS

Capacity upto 250 Tonne

• Sturdy, rigid and robust in construction.

• Easy & simple in operation and maintenance.

• Lever or switch-operated; semi-automatic single-cycle operation with inching facility. Ejection / Die Cushioning arrangement may be provided as per customers' requirement.

HORIZONTAL OPEN-FRONT / THROAT HYDRAULIC PRESS

Capacity upto 300 Tonne

• Suitable for forming, straightening, bending operations on metal structural sections, including rail.

• Also suitable for making joints & crossings of railway track.

• Provided with adjustable buffer on the main table and rollers on both sides of the Press for easy handling of long and heavy materials.

DOUBLE-ACTION POWER COMPACTING 'C' TYPE / 4-PILLAR HYDRAULIC PRESS

Capacity upto 200 Tonne

• Suitable for compacting powders, viz. ceramic, glass, non-ferrous, graphite, silicon etc.

• Suitably designed for both laboratory and production uses.

• Mode of operation is manual or single-cycle semi-automatic through push button / PLC.

2/4-PILLAR HYDRAULIC PRESS
(WITH / WITHOUT EJECTION / DIE CUSHIONING)

Capacity upto 1000 Tonne

• Sturdy, rigid and robust in construction.

• Suitable for any type of forming, pressing, deep drawing etc. operations.

• Ejection / Die Cushoning system can also be incorporated.

• Gate type construction with additional features is also available.

ELECTRIC / STEAM HEATED SINGLE / MULTI-DAYLIGHT HOT PLATEN PRESS

• Suitable for moulding any type of thermosetting materials viz. rubber, FRP, bakelite etc.

• All controls are through either PLC or Electrical Relay/SSR.

• Temperature of Platen is accurately controlled through PID controller.

• Ideal for both laboratory and industrial work.

MULTI-DAYLIGHT STEAM / ELETRICALLY HEATED PLATEN PRESS 

Capacity upto 1000 Tonne

• Suitable for making particle Boards from agro-waste, wood dust, wood / bamboo chips etc.

Portable Hydraulic Gadget (consisting of 2 Nos. Portable Presses and 1 No. Power Pack) suitable for Assembly / Dismantling of any fixtures, fittings where direct application of load is required.

• This Gadget can also be used for pre-fabrication straightening, fitting or holding the job under pressure during fabrication.

• The equipment is operated through electric motor driven Power Pack, and can be used independently simultaneously.

• This item is especially used in Railway Bogie Shops.

Horizontal Tensile Testing Machine suitable for testing chain, wire rope, hook, 'D' shackle, chain pulley block and speciality Railway Safety Items viz. draw hook, draw bar, screw coupling, shackles etc.

• Available upto 350 tonne capacity suitable for handling different job length from 0.5 Mtr. to 12 Mtr. with adjustable gap.

• Load and Elongation indication by means of DRO through pressure transducer and linear transducer, respectively.

• For periodic calibration, suitable fixtures using compressive type proving ring may be incorporated at the back of the cylinder on the machine.

• Horizontal Tensile Testing Machine specifically suitable for Railway Safety Items viz. draw hook, draw bar, screw coupling, shackles etc using suitable testing fixtures.

• Capacity: 200 tonne. Gap: 1 Mtr. fixed fabricated structure, pull-back type cylinder. Load and Elongation indicator by means of DRO through pressure transducer and linear transducer, respectively.

• For periodic calibration, suitable fixtures using compressive type proving ring may be incorporated at the back of the cylinder on the machine.

Compression Testing Machine is suitable for testing sample blocks of concrete, stone or other material viz. bridge bearing, metallistic mounting block where some compression load testing is required.

• Load indication either by analogue type indicator or by DRO through transducer. Linear transducer may be provided for deflection indication.

• Spring Testing Machine both for load deflection & scrag testing.

• Fatigue Testing Machine.

TEST PUMP

• Manual / Motorised Water-Hydraulic Test Pump suitable for pressure testing vessel, valve, gas cylinder, hose etc., upto 400 Bar.

• The unit is complete with all necessary valves and gauges, making it a compact testing system.

DOUBLE-ACTING / SINGLE-ACTING CYLINDER

• Suitable for Industrial and Mobile application with mounting as per customers' requirements.

• CYLINDER is made of thick-walled seamless steel tube / forged ultrasonically tested round.

• RAM is made of forged high carbon steel, ultrasonically tested, machined, ground and hard chrome surface finished.

• SEALS are of best quality to suit various application.

TELESCOPIC JACK

• Telescopic cylinders suitable for high rise lifting platform, material handling / earth moving equipment and any other industrial / special purpose application.

Specialist in design, development and manufacture of Hydraulic Power Pack & System to suit Customer's specific requirement, matching International Standards.
Using conventional or modular or cartridge type Hydraulic Components of internationally reputed make depending on application.
"PEECO" Power Pack is compact in design ensuring low noise, low heat generation and long trouble-free operation and easy maintenance.

Basic Components/features of "PEECO" Power pack

• Prime Mover : Electric motor or Diesel/Petrol engine.
• Pump : Single or multi-stage i.e. combination of high & low pressure/flow pump to achieve various parameters.
• Oil Tank : Fabricated type anti-corrosion treated as per international standard-provided with all standard accessories viz. Cleaning door, baffle wall, drain-out, oil level gauge, air breather-cum-filler, suction strainer, return line filter, pressure and temperature gauge, etc.
• Oil Cooler : Water/air circulating type heat exchanger.

• Float switch : for low oil level indication through audiovisual signal/auto-stop of electric motor.
• Pressure switch : for additional protection of hydraulic system.
• Thermostat : Will be fitted in the tank to protect the system against over-heating by stopping the motor or starting the oil cooling system.
• Filter Clogging : Audio - visual indication.
• Chilling Plant : Air/Water circulation type chilling plant can be provided for cooling the system.
• Pressure Indication : By means of Bourdon's tube type analogue gauge or digital display through pressure transducer.
• Proportional Valve : Hydraulic system may be designed and developed using electro-proporticnal controlled valve for accurate control of flow and pressure.
• Control Panel : May be provided along with Power pack to operate the system through either Relay Logic or PLC.

* Off-life Cooling & Filteration system and Magnetic Separator.
* Stainless steel Oil Tank to minimise contamination also available.

Other "PEECO" Machines

• Vertical/Horizontal 'C1 type/Open Throat Hydraulic Press.
• 2/4 Column vertical Down-Stroke Press with/without ejection by cushioning.
• Steam/Electrically heated Moulding Press.
• Horizontal Tensile Testing Machine.
• Compression Testing Machine.
• Single/Multi-Stage double acting Cylinder.
• High pressure water-Hydraulic motorised Test Pump.
• Custom-built as per required specifications