|
Automatic Voltage Stabiliser From
1 KVA to 100 KVA range |
Specification
|
Output
Voltage Setting |
: |
The
output voltage can be set anywhere between between 220 -
240V / 380 - 415V |
|
Output
Voltage Regulation
|
:
|
ą
0.5% to 1% (adjustable)
|
|
Output
Wave Form
|
:
|
The
output wave form is a true replica of the input
|
|
Correction
Rate
|
:
|
35V
/ Sec. for each phase
|
|
Effect
of Load Power Factor
|
:
|
None
|
|
Metering
|
:
|
Continuous
monitoring of input / output voltage
|
|
Input
Indications
|
:
|
High
& Low voltage indicators (with audible alarm)
|
|
Controls
|
:
|
Automatic
/ Manual
|
|
Protection
|
:
|
Circuit
Breaker
|
|
Ambient
Temperature
|
:
|
Up
to 45ēC max.
|
|
Nature
of Cooling
|
:
|
Air
Cooled
|
|
Type
of Motor
|
:
|
A.
C. Step Synchronous Motor
|
|
|
Constant
Voltage Transformer |
The
Constant Voltage Transformers is designed to protect your
Computer, EPABX, FAX and every other kind of sophisticated
equipment from electrical hazards.
The
Constant Voltage Transformers provides clean, isolated power
free from spikes, surges and line disturbances; so
necessary for
microprocessor based systems. Instant correction of voltage is
provided and any rapid change in input line voltage is taken
care of. It obviates the need for an additional isolation
transformer.
The
machine provides overload, overvoltage and short circuit
protection. High isolation between output and input helps in
suppressing spikes and transients and ensures zero potential
between ground and neutral of output. Minimum harmonic
distortion is obtained at the output even if square or distorted
wave form is fed at the input. |
|
Relay
Type Voltage Stabiliser |
| Capacity |
Input
Range |
Output
Range |
| 0.5
KVA |
130-280V |
180-245V+/-2% |
| 0.5
KVA |
130-280V |
200-240V+/-2% |
| 0.5
KVA |
110-270V |
210-210V+/-5% |
| 5KVA |
125-280V |
200-240V+/-2% |
| STABILISER |
- |
- |
| 5KVA |
145-270V |
- |
| 5KVA |
130-270V |
- |
|
|
Chirag UPs
|
Built in AVR MOSFET
Based Cold start facility
2 ms transfer time Line
interactive design Extended back
up option Suitable for Indian
Environment Intelligent battery
management Most sleek, Smart
looking and Handy
Technical
Data
Input
- Phase (Single Phase), Voltage (145-265V), Frequency (50 Hz
+/-5%)
Output
- Wave Form (Pulse width modulated wave of same RMS as Sine
Wave, Voltage on Inverter (220 V +/1 4%), Voltage on Mains (220V
+/- 9%) |
Chirag
Digital
Invertor |
Easy to connect Auto Start-Stop
Trickle Charge Facility Bypass
Facility Stable Frequency
Fuse Blown Indicator Overload
Protection Battery Condition
Indicator
Technical
Data
Main
Input - Phase (Single Phase), Voltage (220V ą 15%),
Frequency ( 50 Hz ą 5%)
Inverter
Output - Wave Form (Modified Square Wave), Voltage (220V ą
15%)
Battery
- Type (Lead-Acid), Voltage (12V - 24V), Recharge Time (10 to 14
Hrs to get 90% Charge) |
