|
|
 HIGH
FREQUENCY IMMERSION CONCRETE VIBRATOR
Powered
by 4.4-HP 'GREAvEs' Diesel Engine or 5.5 HP 'FIELD MARSHALL
HATZ' Diesel En_ or 1.9-HP 'GREAVES' Petrol/Kerosene Engine
or 3.4-HP 'GREAvES' Petrol/Kerosene Eng or 3.1 HP 'SHRIRAM
HONDA' Petrol/Kerosene Engine or 2-HP/3-HP 440/3/50 AC Elec
Motor, directly coupled with 4 mtr/5mtr. or 6 mtr. long
flexible shaft and with 28 mm/40n 50 mm/60 mm or 70 mm dia
needle, mounted on 360 swivelling base with handles.
Water Pump can be fitted with flexible shaft and can be
driven with the engine of vibrc and thus eliminates requirement
of seperate engine for Pump.
|
| |
PNEUMATIC IMMERSION
CONCRETE VIBRATOR (BEARING LESS)
'AEROJET' is a. unique type of Vibrator having the latest
vibration technique & design. It has no ball bearings
and has one moving part only, still it's performance is highly
satisfactory. It's wear & tear is quite insignificant
and maintenance cost is also negligible. All parts are made
of special alloy steel. Supplied with 10ft. intake & exhaust
hose and 15 ft. 3/4" air auxilary hose, tW!st throttle
control. Available in various needle sizes.
|
| |
 SCREED
BOARD VIBRATOR
Vibrations 3000 to 5000 per min. Supplied with a pair of shock
absorbing handles v. rubber grips and a pair of steel rollers
with brackets and nut & bolts to mount the hand and the
vibrating unit on the wooden board of 3" wide x 9"
height.
Powered by 4.4 HP 'GREAVEs' Diesel Engine or 5.5 HP 'FIELD
MARSHALL HATZ' Diesel Engi or 1.9-HP 'GREAVES' Petrol/Kerosene
Engine or 3.4-HP 'GREAVES' Petrol/Kerosene Engi or 3.1 HP
'SHRIRAM HONDA' Petrol/Kerosene Engine or 2-HP 440/3/50 AC
(TEFC) Elect Motor.
Used for vibrating Concrete Roadways, Air-Port aprons, Floors
etc.
|
| |
ELECTRICAL SHUTTER
/ FORM VIBRATOR
Vibrations 3000 per minute. Used for vibrating forms, shutterings
of cast-in situ concrete, prestressed and precast units including
electric poles, beams, channels and bulk material handling.
Pneumatic Type - Vibrations 8000 per minute. Most suitable
for TUNNEL CONCRETING. Also used for vibrating forms, shuttering
of cast-in-situ concerte, bulk material handling.
|
| |
PAN
/ PLATFORM OR SURFACE VIBRATOR
Vibrations 3000 to 4000 per minute. Available in pan sizes
of 15" x 24",18" x 24",18" x 3( &
24" x 24". Bottom edges bevelled like a pan &
fitted with shock absorbing handle. Power€ by 1.9 - HP
Petrol/Kerosene Engine or 1/2-HP/1-HP/2-HP 440/3/50 AC Electric
Motor.
|
| |
|
