 |
Cushyfloat™
This mounting is an ideal general-purpose unit designed
to provide effective isolation of vibration and noise
arising from both static and mobile equipment. Used predominantly
for mounting medium and high-speed marine propulsion units. |
|
SIM™
This mounting is ideal for mobile applications. The soft
vertical stiffness combined with the high stiffness in
the longitudinal direction makes it suitable for suspension
of marine engines both with and without thrust. Used predominantly
for vibration isolation of small to medium sized machines.
|
  |
HT
Cushyfloat™
This new range of Cushyfloat™ mountings are designed for
high-performance engine applications where the need to
accommodate the thrust and load transfer on the mounts
due to torque, dominate the performance requirements.
Features include higher longitudinal stiffness and a vertical
stiffness characteristic, which is controlled over a wider
deflection range. |
 
|
Cushymount™
and Cushymount™ 'K' Mountings
Large load capacity, large deflection and long life characterise
these antivibration mountings. They are ideally suited
for the suspension of medium speed diesel engines used
for marine main propulsion and auxiliary power generation
applications. Integral buffers limit maximum movement
in the vertical and horizontal axes. Also used for exhaust
systems and deckhouse suspensions. |
  |
'D'
Series and Super 'D'Mountings
These mountings are particularly suitable for applications
such as marine propulsion engines, diesel generators and
heavy machinery where isolation of low frequency vibration
is required. They are commonly used for shock isolation
on board military vessels and have a displacement capacity
of up to 50mm in all directions. |
 |
DX
Mountings
This latest addition to our ‘D’ Series range of mountings
offers similar benefits to ‘D’ and Super ‘D’ mountings
together with a modular design to accommodate varied load
configurations, customer specific fixing points, excellent
acoustic performance and shock displacement of up to 75mm
in all directions |
 |
Rectangular
Mounts or 'Sandwich' elements
These products are used in a vee arrangement for the suspension
of medium speed propulsion engines and generator sets.
In this configuration, they provide a very stable mounting
system, minimising movement at flexible connections, whilst
maintaining soft spring rates for the best vibration and
noise isolation. |
 |
Large
Equi-Frequency Mounts
This range of mounting is designed to support and isolate
marine propulsion engines, generator sets, gas turbine
engines and machinery rafts. They all have similar horizontal
and vertical stiffness characteristics, with two sizes
of mounts produced in four rubber compounds, it is possible
to support static loads from 40 to 215 kN per mount. |
