| Float & Board Level Indicator - |
FEATURES : It is an accurate, reliable & trouble free float operated technique used in large non- pressurized storage tanks.
APPLICATION : Liquid storage tanks having corrosive fumes / vapours, as well as tanks having pressure maximum upto 1 Kg/Cm² & also for Nitrogen Purged Solvent Tanks. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Measuring Range - |
7.5 mtrs. with Ø 200 mm float. /
15 mtrs. with Ø 350 mm float. |
| Float - |
SS 304, SS 316, PP |
| Max. Temperature - |
150˚ C. |
| Max. Pressure - |
Atmosphearic |
| Installation - |
Ground level tank / Underground tank (sump) / Overhead tank. |
| |
|
|
| |
|
top ... |
| Magnetic Liquid Level Gauge - |
FEATURES : It is commonly used for visual level indication of liquids which attack glass or hazardous, flammable, toxic, aggressive, agitated, contaminated and under high temperature & pressure or where glass gauges are unsafe.
APPLICATION : Liquified Gases, CL2, NH3, Propylene, PCL3, Oleum, H2SO4, HCL, Pesticides, Molten Sulphur, Lead, Solvent Acids, Chlorosulphonic Acid. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Installation - |
Side / Top. |
| Range ( CC Distance) - |
Max. 3000 mm (Magnetic follower capsule) / Max. 5000 mm (Bicolour rotating flappers) |
| Float Chamber - |
SS 304 / SS 316 / PP |
| Float - |
SS 316 / PP |
| Calibrated Scale - |
Black Anodized Aluminum / SS (LC= 10 mm) |
| Process Connection - |
Flange to ASA (BS / DIN Std.) |
| Max. Temperature - |
400˚ C |
| Max. Test Pressure - |
25 Kg/Sq.Cm. |
| |
|
|
| |
|
top ... |
| Pivoted Level Switch - |
FEATURES : Economical, Maintenance free and reliable device used for high, low or intermediate point level switching. It is ideal for tanks with inaccessible tops or bottoms.
APPLICATION : Fuel Oil Tank Control, Boiler feed water drum control, Cooling Tower lubrication / Cooling / Filtration Systems, Paint Shops, Water / Wast Water Treatment Plants, Food / Drug / Pharmaceuticals / Petrochemicals Plants, Separation Plants, Sealing Liquid Control for generators etc. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Installation - |
Normally side. Top for special application. |
| Switching Enclosure - |
Case Aluminium, WP to IP 56 / IP 65 or ex- proof for gr IIA & IIB or IIC. |
| Float - |
SS 304 / SS 316 / PP / PTFE coated |
| Process Connection - |
Flanged. |
| Switching Capacity - |
5 Amp, 230 V AC |
| Repeatability - |
± 1 mm |
| Max. Temperature - |
Upto 250˚ C and high temp. model upto 350˚ C |
| Max. Pressure - |
Upto 20 Kg/Cm² at ambient temperature. |
| Special Features - |
Adjustable differential, L / Z cranked trims, high temperature construction, beam construction. |
| |
|
|
| |
|
top ... |
| Conductivity Type Level Switch - |
FEATURES : A simple, low cost, point level controller designed for detection of conductive liquids having low densities, high viscosities, containing solid particles and interface between nonconductive and conductive liquids.
APPLICATION : Water / Waste Water Treatment Plants, Food / Drug / Brewary Plants, Paper / Sugar Industry. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Enclosure - |
Cast Al, WP IP- 66, Ex- Proof Gr.IIA, IIB or IIC. |
| Process Connection - |
40 / 50 / 80 NB, Flanged to BS (ASA or DIN Stds.) |
| Process Conn. MOC - |
MS or SS 304 or SS 316. |
| Probe type - |
Solid (up to 4 mtrs.) / Suspended (up to 10 mtrs.) |
| Electrode MOC - |
SS 304 or SS 316, Hastelloy / Titanium tips (for corrosive application.) |
| No. of Setpoints - |
Upto 4 |
| Max. Temperature - |
70˚ C (with PVC insulation) / 200˚ C (with PTFE insulation) |
| Max. Pressure - |
20 Kg/Cm² at amb. Temp. |
| |
|
|
| |
|
top ... |
| Capacitance Type Level Switch - |
FEATURES : Suitable for liquids, slurries and solids. No moving parts, easy to install with field adjustable setpoints.
APPLICATION : Water, Milk, Oil, Ammonia, Syrups, Chemicals, Effluents, Pulps, Lubricants, Grains, Cement, Coal etc. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Enclosure - |
Cast Al. W.Proof IP 65 / Glass Polyester W.Proof IP 65 |
| Electrode type - |
Rigid (Upto 3500 mm) / Flexible (Upto 8000 mm including counter weight |
| Electrode Material - |
SS 304 or SS 316 |
| Process Conn. - |
25 NB / 65 flange |
| Power Supply - |
110 V AC or 230 V AC, 50-60 Hz or 24 V DC. |
| Control Setpoint - |
One / Two. |
| Indication - |
Indication for power & relay status. |
| Accuracy - |
± 1% |
| Repeatibility - |
± 0.5% |
| Max. Temperature - |
80˚ C |
| Max. Pressure - |
10 Kg/Cm² (30 Kg/Cm² optional) |
| Installation - |
Side / Top. |
| |
|
|
| |
|
top ... |
| Displacer Type Level Switch - |
FEATURES : Suitable for large tanks upto 15 meters. Wide choice of switching function. Site adjustable switch points.
APPLICATION : Large Sumps & Fuel Tanks, Boiler Feed Water, Waste Water & Sewage, Interface Liquids, Petrochemical, Nuclear Power, Generator Sealing Liquids. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Enclosure |
Cast Al, WP- IP66, Cast Al Ex- Proof Gr. II A & II B or II C. |
| Measuring Range |
200 mm – 15000 mm. |
| Switch Contacts |
2 SPDT (2 NO + 2 NC) @ 5A, 230 V AC (Resistive) |
| Flexible Rope |
SS 304, SS 316, PP, PTFE |
| Displacer |
SS 304, SS 316, PP, PTFE. |
| Process Connection |
Flanged- MS, SS 304, SS 316, PP (SS Clad), PTFE (SS Clad) |
| Max. Temperature |
0-300˚ C |
| Max. Pressure |
Vacuum to 40 Kg/Cm² |
| |
|
|
| |
|
top ... |
| Magnetic Float Guided Level Switch - |
FEATURES : Suitable for single / multiple liquid level sensing and control in open or pressurized tank Also gives trouble free services in conductive / non- conductive liquids under widely varying temperature, pressure, liquid viscosity and corrosive conditions.
APPLICATION |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Mounting |
Top |
| Guided Tube MOC |
SS 304 / SS 316 / PP / PTFE Lined. |
| Preset Level |
Single / Multiple (Max. 4) |
| Process Connection |
Flanged or Screwed |
| Switching Capacity |
40 VA (N/O) / 60 VA (1 C/O) |
| Accuracy / Repeatibility |
± 2 mm / ± 1 mm. |
| Max. Temperature |
150˚ C (Metallic) / 70˚ C (PP) |
| Test Pressure |
15 Kg/Cm² (Metallic) / 3 Kg/Cm² (PP) |
| |
|
|
| |
|
top ... |
| Tilt Type Level Switch - |
FEATURES : Simple, Economical, Reliable, Maintanance free, Easy to Install and maintain level switch for level switching in large open tanks containing liquid like water, effluent, sewage etc.
APPLICATION : Used in Sumps, Sewserage, Factory Drainage, Sludgy & highly glutinous liquids and Soil Water containing suspensions for automatic switching of pumps. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Process Connection |
Flanged, 4” NB, BS- 10 T ‘D’ |
| Integral Cable length |
3, 5, 6, 10 & 20 Meters. |
| Suspended float |
PP, 90 Ø x 40 mm thick. |
| Contact type |
Micro Switch (SPDT) |
| Contact Rating |
8A @ 230 V AC |
| Max. Temperature |
-10 to +70˚ C. |
| Max. Pressure |
1 Bar. |
| Adjustable Stopper |
Rubber, Ø 50 x 58H |
| |
|
|
| |
|
top ... |
| RF Admittance Type Level Switch - |
FEATURES : Hight reliability as coat guard technique ignores material built- up on the probe. Easy of calibration & insatallation. Suits highly dusty environment. Economic solution for critical application.
APPLICATION : Suitable for Cement, Sand, Lime, Soda Ash, Talcum Powder, Milk / Chocolate Powder, Coffee, Sugar, Salt, Resin Powder & Pellets, Fertilizer, Wheat, Flour, Rice Barley, Butter, Iron Powder, Carbon, Calcium, Slurry, Sludge, Sewage, Coal, Wax, Cream, Sodium, Carbonate, Ink, Alcohol, Beer, Waster Water, Syrup, Chromium Acid, Sesame. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Probe length |
350 mm to 3000 mm. |
| Sensing Rod |
SS 304 |
| Coat guard shield |
SS 304 |
| Grounding |
GI / SS 304 |
| Insulation |
a) PTFE (Standard or Heavy) for liquids.
b) Ceramic (Heavy) for solids. |
| Operating Temp. |
150˚ C / 225˚ C with GI. Temp. stand off. |
| Mounting |
Top / Side |
| Process Connection |
a) Screwed – 1 ½” BSP (M) Std.
b) Flanged – 1 ½ NB, BS- 10 T ‘D’ |
| Output |
2 Sets of potential free C/O Contacts rated at 5 Amp., 230 V AC (resistive load) |
| Supply |
230 or 110 V AC, 50 Hz (± 15%) or 24V DC. |
| |
|
|
| |
|
top ... |
| Vibration Fork Point Level Switch - |
FEATURES : Fast and Easy Installation, No Calibration. No effect of electrical properties on service material. High Reliability Suitable for the highly dusty environment. Field selectable operation logic. Can be configured either for high or low level point switching.
APPLICATION : Building Material, Cement, Sand, Lime etc. Foodstuff Industry, Milk Powder, flour, salt, foodrgrain, etc. Plastic industry, Powder, Granular etc Timber Industry, Chemical mining etc. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Housing |
Cast aluminium, weatherproof, powder coated Integral with the fork. |
| Supply |
230 V AC (± 10%), 50 Hz. |
| Output |
2 Sets of potential free c/o contact rated at 5 amps, 230 V AC for non- inductive loads. |
| Mounting |
Screwed- 1 ½” BSP (M) (Stndard), Flanged. |
| Fork |
Stainless Steel, 316. |
| Probe length |
240 mm (standard), Max 3000 mm. |
| Operating Temperature |
150˚ C max. (inside vessel) / 200˚ C max. (inside vessel temp. on demand) |
| |
|
|
| |
|
top ... |
| Rotary Paddle Level Switch - |
FEATURES : Used for detecting the level of free flowing solids / bulk materials.
APPLICATION : Flour, Grains, Plastic Pellet & Granules, Foundry Sand, Pigment, Cement, Fly- Ash and Detergent. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Power Supply |
110 / 220 V AC |
| Contact Rarting |
AC 250 V, 3A (1 SPDT) |
| Operating Temperature |
-10 to 80˚ C (Standard) / - 10 to 150˚ C (High Temp. with fins.) |
| Process Connections |
1” BSP (M) Screwed or flanged. |
| Installation |
Side / Top / Angular. |
| Paddle Type |
‘S’, ‘D’ & ‘C’ type (SS 304) |
| Enclosure |
Weather Proof (ABS + Glass) |
| |
|
|
| |
|
top ... |
| Ultrasonic Level Transmitter - |
FEATURES :
- Compact Two Wire Loop Powered.
- PVDF Wetted Parts
- False Echo Rejection.
- HART Compatible
- ATEX Hazardous area approved units for use in Zone Zero.
APPLICATION : Non contact level measurement of liquid and solids. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Measuring Range. |
Up to 30 Mtrs. |
| Enclosure |
IP 66 |
| Power Supply |
12- 30 V DC (Loop Powered) |
| Output |
4-20 mA into 750 Ohms. |
| Relays |
2 |
| Transducer Material |
PVDF |
| Resolution |
1 mm |
| Accuracy |
0.25% of measured valued. |
| Operating Temperature |
- 20 to +70 deg.C. |
| Operating Pressure |
3 bar Max |
| |
|
|
| |
|
top ... |
| Radar Level Measurement - |
FEATURES :
- Non Contact level Measurement of liquid and solids.
- Measuring ranges upto 40 m (Option for 100 Mtr. )
- Display of level, distance or volume.
- 2 Wire loop powered 24 V DC or 4 Wire 110 / 230 V AC.
- Hazardous area ATEX, EExd and EExia.
- HART, Profibus (PA) and Foundation Fieldbus.
- Suitable for narrow tanks with minimum fixed beam diameter.
- Unaffected by dust during fill or empty conditions.
- High temperature and pressure options are available.
APPLICATION : Suitable for Liquids, Pastes and Solids. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Accuracy |
for liquids +/- 3 mm
for solids +/- 20 mm. |
| Repeatability |
+/- 1 mm. |
| Max. Pressure |
40 bar. |
| Max. Temperature |
200˚ C |
| Power Supply |
2 Wire, 24 V DC |
| Output |
4-20 mA |
| HART Compatible |
Yes. |
| |
|
|
| |
|
top ... |
| Displacer Type Level Transmitter - |
FEATURES :
- HART Compatible.
- Ex-Proof and IS Version are available.
APPLICATION : To measure continuous level of liquids present in tank. |
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Input Signal |
0 to 100% of Displacer length. |
| Output Signal |
Two Wire 4 – 20 mA dc. |
| Display |
Display Meter. |
| Accuracy (Ref.) |
± 0.5% of full scale. |
| Power Supply |
1) 35 V DC for Ex- Proof.
2) 30 V DC for IS. |
| Temperature |
65˚ C |
| Max. Working Pressure |
150 Kg/Cm² |
| |
|
top ... |
